Customization: | Available |
---|---|
Task: | Solenoid Valve |
Structure: | Solenoid Valve |
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Product Feature
1. Pilot-oriented mode:Internal pilot or external pilot.
2. Structure in sliding column mode: good tightness and sensitive reaction.
3. Three position solenoid valves have three kinds of central function for your choice.
4.Double control solenoid valves have memory function.
5. Internal hole adopts special processing technology which has little attrition friction,
low startpressure and long service life
6. No need to add oil for lubrication.
7.lt is available to form integrated valve group with the base to save installation space.
8. Affiliated manual devices are equipped to facilitate installation and debugging
9.Several standard voltage grades are optional.
Installation &Usage
1. Before installing, be sure the valve hasn't been damaged via transportation.
2. lt's suggested to use the medium lubricated by 40um filter element.
Be aware of the flowdirection and port size.
3. Please notice whether the installation condition accords with technical requirements
(suchas "voltage" "actuation frequency", "working pressure" and "scope of
applicationtemperature"), then the equipment can be installed and used
4. Notice the flow direction of air during installation, P is the air intake,
A (B) is the work portand R (S) is the exhaust outlet.
5.Take measure to avoid vibration and frozen.
6. Before using the fittings and tubes make sure they are clean.
When connecting to fittings.be sure the PTFE Thread Seal Tape is used correctly.
7. To keep the dust away, please use the silencer for the exhaust ports.
Never forget to instaldirt-proof boot in air intake and outlet during dismounting.
8. After installing, please use the manual override to test valve first.
specification | ||||
Model | 4V210-06 4V220-06 |
4V230C-06 4V230E-06 4V230P-06 |
4V210-08 4V220-08 |
4V230C-08 4V230E-08 4V230P-08 |
Fluid | Air(to be filtered by 40μm filter element) | |||
Acting | Internal pilot orexternal pilot | |||
Port size [Note1] | In=Out=Exhaust=1/8" | In=Out=1/4"Exhaust=1/8" | ||
Orifice size(Cv) [Note4] |
4V210-08,4V220-08:17.0mm²(Cv=1.0) 4V230C-08:13.6mm'(Cv=0.8) |
|||
Valve type | 5 port 2 position | 5 port 3 position | 5 port 2 position | 5 port 3 position |
Operating pressure | 0.15-0.8MPa(21~114psi) | |||
Operating pressure | 1.2MPa(175psi) | |||
Temperature | -20-70ºC | |||
Materialofbody | Aluminum alloy | |||
Lubrication [Note2] | Not required | |||
Max,frequency[Note3 | ]5 cycle/sec | 3 cycle/sec | 5 cycle/sec | 3 cycle/sec |
Weight (g) | 4V210-06:220 4V220-06:320 |
360 | 4V210-08:220 4V220-08:320 |
360 |
[Note1]PTthread,G thread and NPT thread are available. | ||||
[Note2]Once lubricated air is used,continue with same medium to optimise valve life span.Lubricantslike ISoVG32 orequivalent arerecommended |
||||
[Note3]Themaximum actuation frequencyisin the no-load state | ||||
[Note4]Equivalentorifice SandCvare all calculated from the flow rate data. |